Automatic Day/Night Interior Mirror

Automatic Day/Night Interior Mirror

Removing

- Unclip cable channel cover - 3 -.





- Remove connector from retainer and disconnect.

• The cable channel - 2 - should not be used for rotating.

- When removing, rotate mirror - 1 - 60 to 90°- B arrows - until retaining spring disengages and remove mirror - arrow A -.

Installing

• The cable channel - 2 - should not be used for rotating.

- Install mirror - 1 - at a 60 to 90° offset to installation position - arrow A - and turn - arrows B - until retaining spring engages.