9-Way Relay Carrier

Relay and Fuse Panels

CAUTION!
Before beginning repairs on the electrical system:

• Obtain the anti-theft radio security code.

• Switch the ignition off.

• Disconnect the battery Ground (GND) strap.

• After reconnecting vehicle battery, re-code and check operation of anti-theft radio. Also check operation of clock and power windows according to Repair Information and/or Owner's Manual.

• Steps after reconnecting voltage supply => Battery.

9-Way Relay Carrier

Removing

- Remove driver's storage compartment.

- Remove nuts - 3 - and remove Vehicle Electrical System Control Module (J519) with cables connected.





- Remove 9-way relay carrier - 4 -.

- Unclip fuse carrier at 9-way relay carrier.

- Remove relays, control modules, and then unclip respective relay carrier.

• Precise location of 9-way relay carrier should be taken from appropriate wiring diagram.





•

Installing

Installation is the reverse of removal.

Tightening Specifications