Primary Connector With Round Terminal Connector Systems

Primary Connector with Round Terminal Connector Systems

Procedure

• If necessary, housing securing mechanisms (secondary locks) must be released or removed using specified tool before releasing the contacts => [ Secondary Lock ].

- Guide release tool (which fits terminal housing) into release channel on terminal housing as illustrated.





- Grasp contact at wire and gently push into terminal housing - left arrow -.

• By pushing contact in direction of terminal housing, contact retaining tabs are lifted off the housing shoulder and can be released using release tool.

- At the same time, push release tool in direction of the terminal housing - right arrow - and pull the released contact out of the terminal housing.

- Remove the release tool after removing the contact from the housing.