Operation CHARM: Car repair manuals for everyone.

Diagram 105/2 (Tracks 1-14)






IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Starter, Ignition/Starter Switch, Mass Air Flow (MAF) Sensor, Starting Interlock Relay, Transmission Control Module (TCM)





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

B - Starter

D - Ignition/Starter Switch

G70 - Mass Air Flow (MAF) Sensor Locations

J207 - Starting Interlock Relay Locations

J217 - Transmission Control Module (TCM) Common Modules Overview

J623 - Engine Control Module (ECM) Locations

S5 - Fuse (on fuse/relay panel)

S231 - Fuse (on fuse panel)

T1 - 1-Pin Connector, black, engine compartment, right

T1d - 1-Pin Connector, black, engine compartment, left

T4x - 4-Pin Connector, black, near battery

T17e - 17-Pin Connector, white, connector station E-box, plenum chamber Connector Station

T17j - 17-Pin Connector, brown, connector station E-box, plenum chamber Connector Station

T94 - 94-Pin Connector, black

(501) - Threaded Connection 2 - terminal 30 (on relay panel)

(A2) - Plus Connection (15) (in instrument panel wiring harness)

(A32) - Plus Connection (30) (in instrument panel wiring harness)

(A70) - Connection (15a, Fuse 231) (in instrument panel wiring harness)

(D51) - Plus Connection (15) (in engine compartment wiring harness)

(D97) - Connection (50) (in right engine compartment wiring harness)

* - for engine codes BKN, ASB only

** - for engine codes BWE, BPG only

*** - for engine codes BBK, BHF only

**** - for engine codes AUK, BKH only

Next Diagram 105/3 (Tracks 15-28)