Transmission Cover Assembly Overview

Transmission Cover Assembly Overview





1 Transmission cover

2 Dowel sleeve

• 2 x

• For centralizing transmission cover on bearing housing.

• Drive out and in with drift (3121).

3 Roller bearing

• Bearing for output shaft in transmission cover.

• Always replace.

• Pulling out, refer to => [ Pulling roller bearing for output shaft out of transmission cover ] Transmission Cover

• Pressing in, refer to => [ Pressing new roller bearing for output shaft into transmission cover as far as the stop (press in carefully) ] Transmission Cover

4 Roller bearing

• Bearing for input shaft in transmission cover.

• With lubricating unit.

• Always replace.

• Pulling out, refer to => [ Pulling roller bearing for input shaft out of transmission cover ] Transmission Cover

• Pressing in, refer to => [ Pressing new roller bearing for input shaft into transmission cover as far as stop (press in carefully) ] Transmission Cover

5 Ball sleeve

• For selector rod for 1st and 2nd gear.

• Pulling out, refer to => [ Pulling out ball sleeve from
transmission cover ] Transmission Cover

• Driving in, refer to => [ Driving ball sleeve into transmission cover until flush ] Transmission Cover

6 Ball sleeve

• For selector rod for 5th and 6th gear.

• Pulling out, refer to => [ Pulling out ball sleeve from
transmission cover ] Transmission Cover

• Driving in, refer to => [ Driving ball sleeve into transmission cover until flush ] Transmission Cover

7 Multi point socket head bolt, 24 Nm

8 Retaining plate

• Secures needle bearing => [ (Item 3) Roller bearing ] and needle roller bearing => [ (Item 4) Roller bearing ] in transmission cover

• Installation position, refer to => [ Securing needle roller bearing and needle bearing in transmission cover. ] Transmission Cover