Backup Lamp Switch: Service and Repair

Back-Up Lamp Switch

Special tools, testers and auxiliary items required

• Torque Wrench (V.A.G 1331)

Removing

- If equipped, loosen quick-release connectors - 3 - and remove rear noise insulation - B -.





- Disconnect electrical harness connector - arrow - at Back-Up Light Switch (F4) at right on transmission.





- Remove Back-Up Light Switch - arrow - from selector shaft cover.





Installing

- Install the back-up lamp switch - arrow - into the selector shaft cover.





- Connect the connector - arrow - on the Back-Up Light Switch (F4) to the transmission on the right side.