Servotronic Steering Gear Assembly Overview

Servotronic Steering Gear Assembly Overview





1 Power assisted steering gear with tie rods

• Assembly overview, refer to => [ Power-Assisted Steering Gear Assembly Overview ] Power-Assisted Steering Gear Assembly Overview

2 Servotronic Solenoid Valve (N119) connector

• Component location: In left front wheel housing

3 Relay carrier, 9-pin

• Located under trim in driver's footwell,

• Servotronic Control Module (J236), item 2

• Check voltage supply, refer to => [ Voltage Supply for Servotronic, Checking ] Voltage Supply for Servotronic, Checking

• Checking speed signal, refer to => [ Speed Signal, Checking ] Speed Signal, Checking

4 Servotronic Solenoid Valve (N119) with fused connector cable

• Remove steering gear to replace Servotronic Solenoid Valve

• Checking, refer to => [ Servotronic Solenoid Valve, Checking ] Servotronic Solenoid Valve, Checking

Do not open Torx bolts!

5 Adapter cable

6 Hex socket bolt, 3 Nm

• SW 2.5 mm

Do not open Torx bolts!

7 Servotronic Solenoid Valve (N119) with connector

• Remove steering gear to replace Servotronic Solenoid Valve

• Checking, refer to => [ Servotronic Solenoid Valve, Checking ] Servotronic Solenoid Valve, Checking

Do not open Torx bolts!

8 Seal

• Always replace

9 Seal

• Always replace

10 Strainer

• Always replace