Clutch: Specifications

Fastener Tightening Specifications





Conventional Clutch
Loosen or tighten the bolts in small steps diagonally

Self-Adjusting Clutch, Sachs
Tighten all 6 bolts clockwise one after the other in stages of 90° (1/4 rotation) until housing comes in contact with flywheel
Tighten all 6 bolts clockwise one after another to 22 Nm

Clutch with SAC Pressure Plate
Tighten all 6 bolts clockwise one after the other in stages of 90° (1/4 rotation) until housing comes in contact with flywheel
Tighten all 6 bolts clockwise one after another to 22 Nm