Parking Aid Sensor Mount

Parking Aid Sensor Mount

Removing






- Remove mount for the impact absorber. Refer to => [ Impact Absorber ] Impact Absorber.

- Remove the bolt - arrows - and then remove the mount - 1 -.

- If the mount is replaced, remove the parking aid sensor. .

Installing

• Tightening specifications, refer to => [ Radiator Grille Assembly Overview ] Radiator Grille, Audi RS4.

Install in reverse order of removal. Note the following:

- Install the mount for the impact absorber. Refer to => [ Impact Absorber ] Impact Absorber.