Top Center Defroster Vent

Top Center Defroster Vent

Removing






- Remove the instrument panel. Refer to => [ Instrument Panel ] Instrument Panel.

- Remove the nuts - 2 through 7 - on the bottom of the instrument panel.

- Remove the top center defroster vent - 1 - from the instrument panel.

Installing

Install in reverse order of removal. Note the following:

• When tightening the nuts, make sure there is an even distance between the upper side of the instrument panel and the upper edge of the top center defroster vent as well as an even gap all the way around.

Tightening specifications, refer to => [ Instrument Panel Components Overview ] Instrument Panel Components Overview.