Backrest Adjustment Motor Overview

Backrest Adjustment Motor Overview

• The backrest is shown without the upholstery, cover and seat pan.






1 Backrest Frame

2 Nut

• Replace

• 6 Nm

3 Washer

4 Shaft

• The threads must be cleaned before installing the nut - 2 - (for example, using a thread tap).

• Coat the threads on the shaft with locking fluid before installing the nut. For the correct locking fluid, refer to the Electronic Parts Catalog (ETKA).

5 Bolt

• Replace

• Use locking fluid when installing the bolt. For the correct locking fluid refer to the Electronic Parts Catalog (ETKA).

• 7.5 Nm

6 Backrest adjustment motor

• Driver side: driver backrest adjustment motor (V45)

• Front passenger side: front passenger backrest adjustment motor (V46)

• Removing and installing, refer to => [ Backrest Adjustment Motor ] Backrest Adjustment Motor