Headrest

Headrest

Removing






- Press the button - 3 - for the head restraint height adjustment - 2 - in the direction of the - arrow - and pull the head restraint - 1 - out of the backrest - 2 - until it stops.

- Using a small flat-head screwdriver, press the locking spring as far as the stop through the opening - arrow - in the headrest guide - 1 -.






- Remove the headrest - 2 - from the backrest - 3 -.

Installing

Install in reverse order of removal. Note the following:

- Slide the headrest into the backrest as far as the bottom position.

- Check if the headrest locks correctly.

• It must not be possible to pull the headrest back out of the backrest.