Fender Assembly Overview

Body, Front

Fender Assembly Overview





1 Fenders

• Removing

- Remove front bumper. Refer to => [ Front Bumper Cover ] Service and Repair.

- Remove wheel housing liner. Refer to => [ Front Wheel Housing Liner ] Wheel Housing Liners.

- End plate, removing

- Remove the bolts - 2 - and - 4 - and nuts - 7 - and the fender.

• Installing in reverse order

2 Bolt

• 10 Nm

3 Fender Flange

4 Bolt

• 8 Nm

5 Pop Rivet

6 Rear Bracket

• Riveted to the fender

7 Front Bracket

• Riveted to the fender

8 Nuts

• 4 Nm

Fender Brace





1 Brace

- The bumper is removed and press the wheel housing liner to the side in the area of the brace.

- Remove the nuts - 2 - to remove it.

2 Nut

• 8 Nm

• The brace is secured on the right side with bolts tightened to 10 Nm.

3 Longitudinal Member

4 Fenders

5 Bumper Cover Mount

6 Nut

• 4 Nm

Fender Seal





1 Seal

• Self-adhesive.

• Remove the protective film and slide the seal onto the fender mounting flange under the wheel housing liner as illustrated.

2 Fender Flange

• Slide the seal onto the fender flange between the wheel housing liner and the inside of the fender.

3 Fenders

4 Wheel Housing Liner

End plate, Removing and Installing





1 Fenders

2 End Plate

- Remove front wheel.

- Remove the rear part from the wheel housing liner. Refer to => [ Front Wheel Housing Liner ] Wheel Housing Liners.

• Loosen the windshield washer fluid reservoir on the left side.

- Remove the bolts - 3 -, unclip the end plate from the fender rear bracket (=> [ (Item 6) Rear Bracket ] ) and slide it downward.

3 Screws

• 1.5 Nm

4 Clip

• Quantity: 2

Unclip the end plate





- Before the end plate - 1 - can be removed downward, it must first be unclipped from the bracket - arrow - for the fender - 2 -.