Diagram 77/2 (Tracks 1-14)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Distance regulation control module





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J428 - Distance regulation control module Control Modules in Front Part of Vehicle

J533 - Data bus on board diagnostic interface Overview of Control Modules in Interior of Vehicle

J769 - Lane change assistance control module Overview of Control Modules in Rear part of vehicle - Sedan (4-door models) Lane Change Assist Assembly Overview

ST4 - Fuse panel 4

SF7 - Fuse 7 (on fuse panel F) Overview Of Fuses

T8a - 8-pin connector Locations

T12f - 12-pin connector, near the glove compartment

T12h - 12-pin connector

T17f - 17-pin connector, brown Overview Of Connector Stations

T20d - 20-pin connector Locations

(366) - Ground connection 1 (in main wiring harness)

(638) - Ground connection on right A-pillar Overview of Ground Connections (4-door Models (Sedan))

(B108) - CAN bus extended high connection 1 (in main wiring harness)

(B109) - CAN bus extended low connection 1 (in main wiring harness)

(B665) - CAN bus extended high connection 1 (in instrument panel wiring harness)

(B666) - CAN bus extended low connection 1 (in instrument panel wiring harness)

* - Refer to applicable wiring diagram

*2 - Refer to applicable lane assist wiring diagram

*3 - Refer to applicable wiring diagram for fuse positions