Telephone Transceiver (R36)

Telephone Transceiver (R36)

Special tools, testers and auxiliary items required

• Protective Cap For Cable Connector (VAS 6223/9)

The telephone transceiver is located under the right front seat.

- Turn off all electrical consumers.

- Remove the key.

- If control module is replaced, select "Replacement" function for appropriate control module in "Guided Fault Finding".

Use the Vehicle Diagnostic Tester.

Removing

- Remove the right front seat.

- Fold back the floor covering.

- Disengage cover of E-box - 2 - and open the E-box - 1 -.






The telephone transceiver is only wedged into the electronics box.

- Pry the telephone transceiver - 5 - out of the E-box - 4 -.






Only with MOST-BUS

- Disconnect the connector - 2 -.

- Connect the (VAS 6223/9) - 1 - to the connector for the MOST-Bus - 2 -.






All

- Disconnect the connector - 3 -.






- Disconnect Bluetooth antenna (R152) - 1 -.

Installing

- Install in reverse order of removal.

- Adapt Bluetooth connection between the telephone transceiver and telephone handset (R36) / cell phone (R54).

Overview, refer to => [ Component Location Overview, from 11.03.2008 ] Component Location Overview, From 11.03.2008.