Mirror Glass

Mirror Glass

Special tools, testers and auxiliary items required

• Pry lever (80 - 200)

• Protective gloves

Removing

- Protect the upper and lower corners of the housing with tape to prevent paint damage.






- Press the mirror glass - 1 - up and down from the mirror adjusting unit using the pry lever (80 - 200) - arrow -.

• Wear protective gloves.

- Disconnect the heated mirror electrical connectors - 2 - and - 3 - on the rear side of the mirror glass - 1 -.






- Unclip the electrical connector - 5 - from the bracket, if applicable.

- Disconnect the connector - 4 -.

Installing

Install in reverse order of removal. Note the following:

- Position the mirror glass on the mirror adjusting unit and press it on.

• Only press in the center of the mirror when pressing the mirror glass on.