Front Seats, Bringing Into the Service Position

Front Seats, Bringing Into The Service Position

Special tools, testers and auxiliary items required

• Trim Removal Wedge (3409)

Service Position, Implementing






- Bring headrest into lowest lock position.

- Move seat as far back and up as possible.

• For the sake of clarity, the figure does not show the surrounding area.

- If equipped, pry the caps - 1 - from off the seat rail - 2 - using the (3409).

- Unclip the front cover - 1 - with (3409) and pull cover in the direction of the - arrow - off connector station- 2 -.






• Do not disconnect electrical wires.

Service Position, Resetting

Install in reverse order of removal. Note the following:

- Make sure the cover tab slides into connector station correctly.

- Engage the cover correctly with the connector station.