Split Rear Seat Backrest With Pass-Through Overview

Split Rear Seat Backrest with Pass-Through Overview

• The illustration only shows the structure of the right 2/3 section of the backrest. The structure of the left 1/3 section of the backrest is similar.






1 Molding

• Sewn into cover

• For engaging the cover in the backrest shell

2 Cover

• Removing and installing, refer to => [ Backrest with Pass-Through ] Backrest With Pass-Through

• Separating cover from upholstery, refer to => [ Backrest with Pass-Through, Cover and Padding, Separating ] Backrest With Pass-Through, Cover and Padding, Separating

3 Molding

• Sewn into cover

• For engaging the cover in the backrest shell

4 Retaining Channel

• Sewn into cover

• For engaging the cover in the backrest shell

5 Cushion

• Removing and installing, refer to => [ Backrest with Pass-Through ] Backrest With Pass-Through

• Separating cover from upholstery, refer to => [ Backrest with Pass-Through, Cover and Padding, Separating ] Backrest With Pass-Through, Cover and Padding, Separating

6 Outer Bracket

7 Backrest Shell

8 Trim

• For locking

• Removing and installing, refer to => [ Lock Trim, with Lock Cylinder ] Lock Trim, With Lock Cylinder

9 Rear Center Belt Guide

• Replace the entire belt guide if damaged.

• Removing and installing, refer to => [ Center Rear Belt Guide, with Foldable Rear Seat Backrest ] Center Rear Belt Guide, With Foldable Rear Seat Backrest

10 Headrest Guide

• Removing and installing, refer to => [ Headrest Guide ] Headrest Guide

11 Cover Frame

• Only on the right 2/3 split backrest with pass-through

• Removing and installing, refer to => [ Cover Frame ] Cover Frame

12 Inner Bracket

13 Clip

• In foam in upholstery

14 Clip

• In foam in upholstery

• Only with fabric covers

15 Cushion Clip

• Only with leather covers

• For securing cover to upholstery

• Always replace if removed

• Install in same location as before removal

16 Molding

• Only on the right 2/3 split backrest with pass-through

• Sewn into cover

• For engaging the cover in the pass-through opening

17 Plugs

• For securing the cover

• Quantity: 2

18 Molding

• Only on the right 2/3 split backrest with pass-through

• Sewn into cover

• For engaging the cover in the pass-through opening