Cold Start Injector (N17)

Cold Start Injector (N17)

Removing

- Remove the intake manifold. Refer to => [ Intake Manifold Upper Section ] Intake Manifold Upper Section.

- Remove the bolt - 1 - on the clamp - 2 - on the intake manifold.






- Remove the bolt - 1 - from the cold start injector.






- Remove the cold start injector and bracket through the opening.

- Remove the clamp - 1 -.






- Remove the cold start injector from the mount.

Installing

- Install in reverse order of removal.

- Install intake manifold, refer to => [ Intake Manifold Upper Section ] Intake Manifold Upper Section.