Undamaged Window Glass, Preparing For Glazing

Undamaged Window Glass, Preparing for Glazing

- When reusing the undamaged window, cut rest of adhesive material on window and flange with Electric Cutter (V.A.G 1561 A) and Scraper (25 mm) (V.A.G 1561/8) so it is even, but do not remove completely.

• Residual material acts as a base for the new adhesive sealing material.

• Keep adhesive surface free of dirt and grease.

• Only cut back adhesive surface shortly before installation.

• Do not prime or use a cleaning solution on the adhesive surface.