Fuel Pressure Sensor

Fuel Pressure Sensor

Removing

- Remove the upper section of the intake manifold. Refer to => [ Intake Manifold, Upper Section ] Intake Manifold, Upper Section.

- Disconnect the electronic connector from the fuel pressure sensor (G247) - 4 -.

- Remove the fuel pressure sensor - 4 -.





Installing

Installation is in reverse order.

• Tightening specification, refer to => [ Intake Manifold, Lower Section, with Fuel Rail Assembly Overview ] Intake Manifold, Lower Section, With Fuel Rail Assembly Overview

- Install the upper section of the intake manifold, refer to => [ Intake Manifold, Upper Section ] Intake Manifold, Upper Section.