Airbag Adapter, Connecting

Power Front Memory Seats

• From 07.2006, the usual wiring harness routing to connector station under front seat => [ Connectors, Disconnecting ] has been replaced with modular wiring routing => [ Modular Wiring Routing, from 07.2006, Assembly Overview ] Standard Front Seats Overview.

• The modular wiring routing has not been implemented for all countries.

• Check version of front seat and of vehicle and perform repairs accordingly.

• Note the two possible versions of the modular wiring routing, Modular Light or Modular => [ Modular Wiring Routing Versions ] Standard Front Seats Overview.

Airbag Adapter, Connecting

Special tools, testers and auxiliary items required

• Airbag adapter (VAS 6036)

• Vehicle Diagnosis, Testing and Information System (VAS 5051B)

• Before disconnecting ignition and ground wiring, technician must electrostatically discharge him/herself (touch door striker plate or pin briefly).

CAUTION!
The Airbag Adapter (VAS 6036) must stay connected to seat until seat is installed again.





1 Power supply connector, seat side (red)

2 Power supply connector, adapter side (red)

3 Side airbag connector, adapter side (orange)

- Disconnect ignition and ground wiring.

- Connect airbag connector - 4 - to airbag adapter connector - 3 -.

4 Side airbag connector, seat side (orange)

Side Airbag Connector, Disconnecting

Special tools, testers and auxiliary items required

• Vehicle Diagnosis, Testing and Information System (VAS 5051B)

- Press catch - 3 - of airbag connector - 2 - out of airbag adapter connector - 1 - and disconnect airbag connector - 2 -.





- Follow measures after connecting battery =>.

• If the airbag malfunction indicator lamp (K75) indicates a malfunction after assembly, check the DTC memory with the vehicle diagnosis, testing and information system (VAS 5051B), clear it, and check it again.