Sensor for Parking Assistance, Front

Sensor for Parking Assistance, Front

Component location: In bumper - arrows -.





Removing

Inner Sensor

- Remove front bumper cover.

Outer Sensor - Vehicles with Gasoline Engine

- Release clip using a screwdriver - arrow A - and remove air inlet grille - 1 - at lower part of bumper cover - arrows B -.





Outer Sensor - Vehicles with 10-cyl. Engine

- Remove front bumper cover.

All:

- Disconnect electrical harness connector - 1 - at sensor.





- Push both catches aside - arrows - and press sensor - 2 - through from outside toward inside.

Installing

Install in reverse order of removal, observing the following:

- Install front bumper cover.