Rear Final Drive 01R (01AA,01EA,02XA,0A3A,01VA,09EA,09LA Transmission) Transmission
Special Tools
Special tools, testers and auxiliary items required
• Needle Bearing Drift (VW 295)
• Friction Meter (VAS 6222)
• Separating Tool (Kukko 17/2)
• Internal Puller (Kukko 21/7)
• Counter-Support (Kukko 22/2)
• Sealing Grease (G 052 128 A1)
• Long Socket (SW 36)
• Two M8 x 30 bolts
Special tools, testers and auxiliary items required
• Universal Measuring Tool (VW 385)
• Holding Fixture (VW 540)
• Torque Gauge (VAS 6222)
Special tools, testers and auxiliary items required
• Puller (VW 391)
• Slide Hammer - Complete Set (VW 771)
• Pulling Hook (VW 771/37)
• Mandrel (3026)
• Retainer (3028)
• Seal Driver-Frt Wheel Bearing (3143)
Special tools, testers and auxiliary items required
• Driver (2062)
• Drip Tray (V.A.G 1306)
• Torque Wrench (V.A.G 1331)
• Torque Wrench (V.A.G 1332)
Special tools, testers and auxiliary items required
• Thrust Pad (VW 442)
• Sleeve (40-21)
• Thrust Piece (40-105)
• Thrust Plate (2050)
• Drift (3138)
• Torque Wrench (V.A.G 1332)
Special tools, testers and auxiliary items required
• Needle Bearing Drift (VW 295)
• Thrust Plate (VW 401)
• Thrust Plate (VW 402)
• Punch (VW 407)
• Punch (VW 408 A)
• Thrust Disc (VW 412)
Special tools, testers and auxiliary items required
• Taper Roller Bearing Puller (V.A.G 1582)
• Collar for Wheel Bearing Inner Race (V.A.G 1582/6)
• Puller (Kukko 44/2)
Special tools, testers and auxiliary items required
• Puller (VW 391)
• Thrust Plate (VW 401)
• Thrust Plate (VW 402)
• Punch (VW 407)
• Punch (VW 408 A)
• Thrust Disc (VW 412)
Special tools, testers and auxiliary items required
• Support Channels (VW 457)
• Removal Device (VW 460)
• Thrust Ring (VW 470/1)
• Sleeve (VW 519)
• Holding Fixture (VW 540)
• Thrust Pad (30-205)
Special tools, testers and auxiliary items required
• Seal Installer (2003/3)
• Thrust Pad (3005)
• Retainer (3028)
• Thrust Pad (3062)
• Drift (3138)
• Seal Driver-Frt Wheel Bearing (3143)
Special tools, testers and auxiliary items required
• Magnetic Plate 50 mm Dia. (VW 385/17)
• Dial Gauge Holder (VW 387)
• Measuring Lever (VW 388)
• Sleeve (VW 521)
• Torque wrench (V.A.G 1331)
Special tools, testers and auxiliary items required
• Slide Hammer - Complete Set (VW 771)
• Mandrel (3026)
• Wheel Bearing Assembly Set (3253)
• Engine/Transmission Jack (V.A.G 1383 A) with Universal Transmission Support (V.A.G 1359/2)
Special tools, testers and auxiliary items required
• Holding Fixture (VW 313)
• Holding Fixture (VW 540)
• Drip Tray (V.A.G 1306)
• Torque Wrench (V.A.G 1331)
• Engine/Transmission Jack (V.A.G 1383 A) with Universal Transmission Support (V.A.G 1359/2)
Special tools, testers and auxiliary items required
• Alignment Fixture-4W Dr.Shaft (3139)
• Pry Lever - Remove Outside Mirror (80 - 200)
• Counterhold tool Touareg V10 (T10172) and Adapters (T10172/5)
• Wheel Hub Support (T10149)
