Luggage Compartment Side Trim

Luggage Compartment Side Trim

Special tools, testers and auxiliary items required

• Pry lever (80-200)





Removing

CAUTION!
Observe the safety precautions for repairs on airbags.

- Remove the rear bench seat => [ Bench Seat ] Rear Seats.

- Remove rear side airbag => [ Rear Side Airbag Igniters, Folding Backrest ] .

- Remove rear cross panel trim => [ Rear Cross Panel Trim ].

- Remove luggage compartment side trim panel.

- Slide tie-downs - 1 - together in retaining tracks - 2 - so they are not over screws.





- Remove screws - arrow - and remove retaining tracks.

- Remove bolts - 1 - and - 2 -.





- If equipped, remove rubber grommet - 3 - on partition grille mount.

- Remove spring clamps from body - arrow -.

- Remove side luggage compartment trim - 4 - from luggage compartment.

Installing

Installation is reverse of removal, but note the following:

- Install rear cross panel trim => [ Rear Cross Panel Trim ].

- Install tie-down retaining tracks => [ Tie-Down Retaining Rail ].

- Install rear side airbag => [ Rear Side Airbag Igniters, Folding Backrest ] .

- Install rubber seal lip over leading edge on luggage compartment side trim.

Tightening Specifications