Power Door Lock Control Module: Service and Repair

Comfort System Central Control Module

Installed location: inside the luggage compartment on the right side.

Removing

- If the control module is replaced, select respective module in "Guided Functions".

- Switch off ignition and remove ignition key.

- Remove right luggage compartment side trim panel.

- Release the springs - arrows A - and remove the comfort system central control module (J393) from the relay and fuse panel - arrow B -.





- Release securing clip on connector - 1 - and remove.

- Disconnect the connectors - 2 - and - 3 -.

Installation

To install, perform the steps used in removal in reverse order.