Supercharger, Securing to Engine and Transmission Holder for Leakage Test

Supercharger, Securing to Engine and Transmission Holder for Leakage Test

• The seals on the support (T40206/2) should seal off the openings inside the compressor housing during the leakage test.

Special tools, testers and auxiliary items required

• Engine and Transmission Holder (VAS 6095)

• Transmission Support (T40206)

• Support (T40206/2)

Securing

• Supercharger removed, refer to => [ Supercharger ] Supercharger.

- Mount the (T40206) with (T40206/1) on the (VAS 6095).






- Secure the supercharger to the transmission holder as illustrated. Use the holes "1", "4", "9", "11" and "13" for the threaded connectors - 1 -.

- Attach the (T40206/2) directly to the supercharger housing at the front and on the right side using the bolt - 2 -.

Support (T40206/2) installed position:






• The seals on the support seal off the openings inside the supercharger housing.