Rear Window Assembly Overview, Avant

Rear Window Assembly Overview, Avant






1 Rear window

2 Adhesive stop profile

• Must be adhered before window adhesive, near rear window heater distributing wire.

• Place inner edge of adhesive stop profile to outer edge of distributing wire for rear window heater and press on.

• Window adhesive must not come into contact with rear window defroster distributing wire.

3 Adhesive sealing material

• Note different distances to window edge.

• Dimension - a - = 2 mm.

• Dimension - b - = 15 mm.

• Center dimension - c - left and right to body.

• Dimension - d - = 32 mm

• Dimension - e - = 15 mm

4 Blind profile

• No replacement part

• Must not be damaged in field of vision when removing window.

5 Spacer

• Adhered 3 times on upper and lower window edge.

6 High mounted brake light

• Must not be removed when the rear window is removed.

Adhesive Stop Profile





1 Blind profile

• No replacement part

• Must not be damaged in field of vision when removing window.

2 Adhesive sealing material

3 Adhesive stopper profile

• Must be adhered before window adhesive, near rear window heater distributing wire.

• Place inner edge of adhesive stop profile to outer edge of distributing wire for rear window heater and press on.

• Window adhesive must not contact window heating distributing wires when installed.

4 Rear window