Rear Parking Aid Warning Buzzer

Parking Aid

Observe notes on contact corrosion. Refer to => [ Contact Corrosion ] Service Precautions.

Rear Parking Aid Warning Buzzer

• Component location: At rear right beneath rear shelf.

Special tools, testers and auxiliary items required

• Pry lever (80 - 200)

Removing





- Switch off ignition and remove ignition key.

- Use (80 - 200) to pry cover grille with high-level brake lamp out of rear shelf - arrow 1 -.

- Pull out cover grille to front - arrow 2 -.

- Unplug connector of high-level brake lamp.

- Disconnect electrical connector - 1 -.





- Press out spring pins - 2 - of expanding clips.

- Lift warning buzzer out of luggage compartment partition.

Installing

Install in reverse order of removal, observing the following:

- Unfasten rear edge of lining for luggage compartment partition.

- Press spring pins into expanding clips.