Diagram 132/6 (Tracks 57-70)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


ABS Control Module, ABS Return Flow Pump, ABS Inlet and Outlet Valve, Brake Pressure Sensor 1





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G201 - Brake Pressure Sensor 1 Locations

J104 - ABS Control Module Control Modules Overview

J105 - ABS Return Flow Pump Relay

J626 - ABS Return Flow Pump Relay 2

N99 - Right Front ABS Inlet Valve Locations

N100 - Right Front ABS Outlet Valve Locations

N101 - Left Front ABS Inlet Valve Locations

N102 - Left Front ABS Outlet Valve Locations

N133 - Right Rear ABS Inlet Valve Locations

N134 - Left Rear ABS Inlet Valve Locations

N135 - Right Rear ABS Outlet Valve Locations

N136 - Left Rear ABS Outlet Valve Locations

N225 - Driving Dynamics Regulation Switch Valve 1 Locations

N226 - Driving Dynamics Regulation Switch Valve 2 Locations

N227 - Driving Dynamics Regulation High Pressure Switch Valve 1 Locations

N228 - Driving Dynamics Regulation High Pressure Switch Valve 2 Locations

T46a - 46-Pin Connector, black, CAN-Bus DisConnection plug, left

V39 - ABS Return Flow Pump Locations

• - CAN-Bus (Data-Bus)

Previous Diagram 132/5 (Tracks 43-56)

Next Diagram 132/7 (Tracks 71-84)