Diagram 121/13 (Tracks 155-168)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Engine Control Module (ECM), Heated Oxygen Sensor, Heated Oxygen Sensor (HO2S) 2, Fuses





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G39 - Heated Oxygen Sensor (HO2S) Locations

G108 - Heated Oxygen Sensor (HO2S) 2 Locations

J623 - Engine Control Module (ECM) Control Modules Overview

SC5 - Fuse 5 (on fuse panel C) Component Locations

SC6 - Fuse 6 (on fuse panel C) Component Locations

SC7 - Fuse 7 (on fuse panel C) Component Locations

SC29 - Fuse 29 (on fuse panel C) Component Locations

SC31 - Fuse 31 (on fuse panel C) Component Locations

T6s - 6-Pin Connector, black, heated oxygen sensor (HO2S)

T6u - 6-Pin Connector, brown, heated oxygen sensor (HO2S) 2

T17e - 17-Pin Connector, red, in electronics box plenum chamber

T94 - 94-Pin Connector, black (Connector B), on engine control module (ECM)

Z19 - Oxygen Sensor (O2S) Heater

Z28 - Oxygen Sensor (O2S) Heater 2

(B146) - Plus Connection 1 (87) (in interior wiring harness)

(B352) - Plus Connection 3 (87a) (in main wiring harness)

(D111) - Connection 9 (in engine compartment wiring harness)

Previous Diagram 121/12 (Tracks 141-154)

Next Diagram 121/14 (Tracks 169-182)