Instrument Cluster Button In Cover

Switches


Instrument Cluster Button in Cover

Special tools, testers and auxiliary items required

• Trim removal wedge (3409)

• Hook (3438)

Removing





- Adjust steering wheel downward and to rear as far as possible, use entire adjustment range of steering column adjustment for this.

- Switch off ignition and remove ignition key.

- Carefully remove trim panel from instrument panel - arrows - using Trim Removal Wedge (3409).

- Open coin tray.

- Slide trim for coin tray to left out of fastener - arrow - and detach.





- Open glove box.

- Starting above glove box, use Trim removal wedge (3409) to carefully remove trim panel with switch module from instrument panel.





• Take particular care when releasing clip at driver side end of trim panel.

- Unplug connector.

- Turn air vent knurled wheel - 3 - on left next to instrument cluster insert fully upwards.





- Above bottom slat - 2 -, insert jeweller's screwdriver - 1 - into each of the air vent clips.

- Alternately pull left and right side of air vent out of installation opening, leaving jeweller's screwdrivers in position.

• If necessary, use Hook (3438) to pull air vent out of installation opening.

- Disconnect electrical harness connector at air vent.

- Repeat procedure at air vent on right next to instrument cluster.

- Remove screws - arrows -.





• Use adhesive tape to affix cloth to protect steering column trim and steering arms.

- Unclip air vents from trim and unplug connectors at air vents.

- Disconnect electrical connectors on instrument cluster cover.

- Engage turn signal indicator switch in lower switch position.

- Activate "one-touch wiping" function and remove instrument cluster cover in this wiper switch position.

- Remove screws - arrows -.





- Detach buttons - 1 - and - 2 -.

Installing





Install in reverse order of removal, observing the following:

- When inserting trim panel - 1 - with switch module, ensure the two fasteners in the center of the panel are inserted between instrument panel and monitor housing - arrows -.