Door Safety and Entry Lamp

Rear Door Lamps and Switches

Door Safety and Entry Lamp

Observe notes on contact corrosion. Refer to => [ Contact Corrosion ] Service Precautions.

Removing





- Press in catch - 1 - using a flat screwdriver and pry out door safety lamp or door entry lamp - 2 -.

- Disconnect electrical connector - 3 -.

- If equipped, carefully pry off cover on door safety lamp - arrow -.





- Remove bulb - 1 - (12V, 3 W) on back of door safety lamp/entry lamp from socket - 2 -.





Installing

Install in reverse order of removal, observing the following:

- If present, install cover on door safety lamp.

- Insert door safety lamp or access lamp into opening and engage on opposite side.