Rear Air Distributor and Air Duct
Center Console with Extension
Rear Air Distributor and Air Duct
1 Center console (with extension)
2 Bolts (Qty. 4), 2 Nm
3 Center console air distributor
• Left Rear Warm/Cold Flap Air Outlet Motor (V220) - 4 -
• Right Rear Warm/Cold Flap Air Outlet Motor (V221) - 5 -
• Left Rear Center Console Temperature Sensor (G311) - 7 -
• Right Rear Center Console Temperature Sensor (G312) - 6 -
Removing
• Before disconnecting the connectors, mark the allocation to Left/Right Rear Warm/Cold Flap Air Outlet Motors and Left/Right Rear Center Console Temperature Sensors.
- Remove center console extension => [ Center Console Extension ]. Center Console Extension
- Remove center console (with extension) => [ Center Console with Extension ]. Center Console With Extension
- Remove bolts - 8 - and - 9 - (Qty. 4).
- Pull the left rear - 10 - and right rear - 11 - air channels out of center console air distributor - 3 -.
- Disconnect electrical harness connectors at Left Rear Warm/Cold Flap Air Outlet Motor (V220) - 4 - and Right Rear Warm/Cold Flap Air Outlet Motor (V221) - 5 -.
- Disconnect electrical harness connectors at Left Rear Center Console Temperature Sensor (G311) - 7 - and Right Rear Center Console Temperature Sensor (G312) - 6 -.
- Remove screws - 2 - (Qty. 4).
- Remove center console air distributor - 3 -.
Installing
Installation is reverse of removal. Observe the following when doing so:
- Ensure the correct allocation when connecting the electrical harness connectors to Left Rear Warm/Cold Flap Air Outlet Motor (V220) - 4 - and Right Rear Warm/Cold Flap Air Outlet Motor (V221) - 5 -.
- Ensure the correct allocation when connecting the electrical harness connectors to Left Rear Center Console Temperature Sensor (G311) - 7 - and Right Rear Center Console Temperature Sensor (G312) - 6 -.
4 Left Rear Warm/Cold Flap Air Outlet Motor (V220)
5 Right Rear Warm/Cold Flap Air Outlet Motor (V221)
6 Right Rear Center Console Temperature Sensor (G312)
7 Left Rear Center Console Temperature Sensor (G311)
8 Bolts (Qty. 2), 2 Nm
9 Bolts (Qty. 2), 2 Nm
10 Left rear air channel
Removing
- Remove center console extension => [ Center Console Extension ]. Center Console Extension
- Remove center console (with extension) => [ Center Console with Extension ]. Center Console With Extension
- Remove bolts - 8 - (Qty. 2).
- Pull left rear air channel out of center console air distributor - 3 -.
Installing
Installation is reverse of removal.
11 Right rear air channel
Removing
- Remove center console extension => [ Center Console Extension ]. Center Console Extension
- Remove center console (with extension) => [ Center Console with Extension ]. Center Console With Extension
- Remove bolts - 9 - (Qty. 2).
- Pull right rear air channel out of center console air distributor - 3 -.
Installing
Installation is reverse of removal.