Luggage Compartment Side Trim

Trim

Luggage Compartment Side Trim





1 - Side luggage compartment trim

• Removing

- Remove luggage compartment floor mat => [ Luggage Compartment Liner ]. Luggage Compartment Liner

- Remove rear cross panel trim => [ Rear Cross Panel Trim ]. Rear Cross Panel Trim

- Open upper fasteners - 2 -.

- Remove storage compartment - 3 -.

- Remove power outlet => [ Luggage Compartment Power Outlet ]. Luggage Compartment Power Outlet

- Flip tie-downs - 4 - (Qty. 4) upward.

- Remove the two phillips-head screws - 5 - in tie-downs.

- Unclip clips - 10 -.

- Remove luggage compartment side trim.

• Installing

Installation is reverse of removal. Observe the following when doing so:

• After installation has been completed, pull tailgate rubber over side luggage compartment trim - 1 -.

2 - Upper fastener (Qty. 2)

• For storage compartment - 3 -

3 - Storage compartment

4 - Tie-downs

5 - Screw, 5 Nm

• 2 each per tie-down

6 - Spring nut (Qty. 3)

• Replace after each disassembly

7 - Rain channel trim

8 - Cover cap

• Clipped out and in

9 - Lower fastener

• For upper fastener

• locks to side luggage compartment trim

10 - Clips (Qty. 2)

• Replace if damaged

11 - Ventilation grille