Upper B-Pillar Trim

Trim

Upper B-Pillar Trim

CAUTION!
Observe safety precautions for working on airbags => [ Airbag Safety Precautions ] Airbag Safety Precautions.





1 - Retainers (Qty. 2)

2 - Upper B-pillar trim

• Removing

- Unclip lower B-pillar trim in area of the upper B-pillar trim.

- Remove nuts - 6 - (Qty. 2).

- Remove upper B-pillar trim - 2 - downward.

- For complete removal: Remove outer anchoring point => [ Outside Floor Assembly Anchorage Point ] Removal and Replacement and guide belt webbing - 7 - out.

• Installing

CAUTION!
Always follow installation sequence for upper B-pillar trim

- Complete removal: Install outer anchoring point => [ Outside Floor Assembly Anchorage Point ] Removal and Replacement and guide belt webbing - 7 - in.

- Clip upper B-pillar trim - 2 - on brackets - 1 - (Qty. 2).

- Make sure the retaining pins - 4 - engage in the mount - 5 - on the eat belt height adjuster.

- Press on upper B-pillar trim - 2 -.

- Screw in nuts - 6 - (Qty. 2).

CAUTION!
Ensure trim is held securely.

- Make sure that door rubber is pulled cleanly over upper B-pillar trim.

- Check function of belt height adjuster.

3 - Clips (Qty. 2)

4 - Retaining pin on upper B-pillar trim

5 - Mount on belt height adjuster

6 - Nuts (Qty. 2)

7 - Belt webbing