Individual Rear Seat
Individual Power Rear Seats
Individual Rear Seat
1 Screw
• Tightening torque: 55 Nm
2 Tab
3 Individual rear seat
• Removing
- Remove seat pan => [ Seat Pan ]. Seat Pan
- Disconnect harness connectors - 7 -, - 8 -, - 9 - and - 10 -.
- Disengage cable harness - 13 - from body.
- Lift strap - 11 - and unscrew bolt - 12 -.
- Lift strap - 14 - and unscrew bolt - 15 -.
- Pull off strap - 2 - and unscrew bolt - 1 -.
- Open seatbelt guide - 5 - at clip - 6 -.
- Thread belt webbing - 4 - out of seatbelt guide - 5 -.
- Unscrew bolt at belt guide mounting point - 4 - => [ Outer Seat Belt Strap ]. Outer Seat Belt Strap
- Lift individual rear seat - 3 - upward and out of vehicle in direction of vehicle travel.
• Installing
- Install individual rear seat - 3 - in reverse order of removal.
- Ensure that individual rear seat - 3 - engage on left and right sides on sliders into guides in body.
4 Belt webbing
5 Belt webbing guide
6 Clip
7 Connector
8 Connector
9 Connector
10 Connector
11 Tab
12 Screw
• Tightening torque: 55 Nm
13 Cable harness
14 Tab
15 Screw
• Tightening torque: 55 Nm
16 Tab
17 Screw