Battery, Preparing For Support Mode

Battery, Preparing for Support Mode

Procedure





Before the battery charger can be connected, the following preparations are necessary:

- Turn off the ignition and all electrical consumers.

- Remove right luggage compartment side trim cover - arrows -.

- Remove cover - 2 - over battery.





• Disregard item - 1 -.

- Clamp the red charging clamp "+" - item 2 - on the battery charger to the battery positive terminal clamp.





- Clamp the black charging clamp "-" - item 1 - on the battery charger to the ground pin on the energy management control module (J644).

- Connect battery charger electrical system connector and switch charger on.