Mirror Adjusting Unit Mount

Mirror Adjusting Unit Mount

Removing

- Remove the door trim..

- Remove the speaker trim and the treble speaker bracket..





- Disconnect the connectors - 4 - and - 5 -.





- Pry the grommet - 2 - out of the rearview mirror seal.

- Remove the retaining studs from the door in the exterior rearview mirror area.

- Remove the bolts - 3 -.

- Remove the mirror adjusting unit mount - 1 - while guiding the wiring harness out through the body opening.

Installation

• Tightening specifications, refer to => [ Exterior Rearview Mirror Assembly Overview ] Exterior Rearview Mirror Assembly Overview.

- Install the exterior rearview mirror seal.

- Install the treble speaker bracket and speaker trim..

- Install the door trim..