Backrest Cover and Cushion Overview
Backrest Cover and Cushion Overview
• The overview is based on a manual or power standard or sport front seat and comfort seat.
1 Retaining Strip
• Sewn into cover.
• For attaching the cover on the rear backrest frame.
2 Cover
• Cover with upholstery, removing and installing. Refer to => [ Backrest Cover and Cushion ] Backrest Cover and Cushion.
• Cover, separating from cushion and connecting. Refer to => [ Backrest Cover, Separating From Cushion ] Backrest Cover, Separating From Cushion.
3 Contour Strip
• Sewn into cover.
• For securing cover to upholstery.
4 Cushion Clamp
• For securing cover to upholstery.
• Always replace if removed.
• Install in same location as before removal.
5 Wire
• In foam in upholstery.
• For securing cover to upholstery.
6 Backrest Frame
7 Cushion
• Cover with upholstery, removing and installing. Refer to => [ Backrest Cover and Cushion ] Backrest Cover and Cushion.
• Cover, separating from cushion and connecting. Refer to => [ Backrest Cover, Separating From Cushion ] Backrest Cover, Separating From Cushion.
8 Pocket
• For side airbag.
• Sewn into cover.