Drawer Mount

Drawer Mount

Removing






- Remove the trim bracket on the sill side. Refer to => [ Retaining Bracket Trim, Sill Side ] Retaining Bracket Trim, Sill Side.

- Move the seat all the way to the rear and raise it.

- Carefully push the right and left release tab - 3 - toward the outside with a screwdriver and remove the drawer - 1 - from the mount - 2 -.

- Remove the bolts - arrows -.

- Disengage and remove the drawer mount form the retainers in the seat pan frame.

Installation

To install, perform the steps used in removal in reverse order.

Tightening specifications, refer to => [ Seat Height Adjuster Overview ] Seat Height Adjuster Overview.