Diagram 41/4 (Tracks 29-42)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


ABS control module, All wheel drive control module





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G625 - Roof rack recognition sensor Locations

J104 - ABS control module Control Modules in Front Part Of Vehicle

J492 - All wheel drive control module Control Modules in rear part of vehicle, overview All-Wheel Drive System Overview

T2ax - Double connector, near the left roof pillar

T2ct - Double connector

T38a - 38-pin connector Locations

T47b - 47-pin connector Locations

(438) - Ground connection 3 (in roof wiring harness)

(B135) - Positive connection 1 (15a) (in interior wiring harness)

(B663) - Suspension sensor CAN bus high connection (in main wiring harness)

(B664) - Suspension sensor CAN bus low connection (in main wiring harness)

* - Only for vehicles with all wheel drive

Previous Diagram 41/3 (Tracks 15-28)

Next Diagram 41/5 (Tracks 43-56)