Diagram 2/15 (Tracks 183-196)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Driver door control module, Lane change assistance warning lamp in driver exterior rearview mirror, Driver exterior rearview mirror turn signal bulb, Driver entry lamp in exterior rearview mirror, Driver automatic dimming exterior rearview mirror, Heated driver exterior rearview mirror





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J136 - Memory seat/steering column adjustment control module Overview of Control Modules in interior of vehicle

J386 - Driver door control module Overview of Control Modules in interior of vehicle

K233 - Lane change assistance warning lamp in driver exterior rearview mirror

L131 - Driver exterior rearview mirror turn signal bulb

T2bs - Double connector, black

T10p - 10-pin connector, red Overview Of Connector Stations

T16m - 16-pin connector

T20f - 20-pin connector

T27a - 27-pin connector, Left A-pillar, bottom

T32g - 32-pin connector

W52 - Driver entry lamp in exterior rearview mirror

Y20 - Driver automatic dimming exterior rearview mirror

Z4 - Heated driver exterior rearview mirror

(B398) - Comfort system CAN bus high connection 2 (in main wiring harness)

(B407) - Comfort system CAN bus low connection 2 (in main wiring harness)

* - Only for vehicles with lane assist

*2 - Refer to applicable wiring diagram

*3 - Only for vehicles with power memory seats

*4 - Only for vehicles with automatic dimming exterior rearview mirror

Previous Diagram 2/14 (Tracks 169-182)

Next Diagram 2/16 (Tracks 197-210)