Diagram 49/5 (Tracks 43-56)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Airbag control module, Data bus on board diagnostic interface





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J234 - Airbag control module Overview of Control Modules in interior of vehicle

J533 - Data bus on board diagnostic interface Overview of Control Modules in interior of vehicle

ST1 - Fuse panel 1

ST2 - Fuse panel 2

SD7 - Fuse 7 (on fuse panel D) Overview Of Fuses

SD11 - Fuse 11 (on fuse panel D) Overview Of Fuses

T16 - 16-pin connector, on the diagnostic connector Overview of Control Modules in interior of vehicle

T17c - 17-pin connector Overview Of Connector Stations

T17e - 17-pin connector, red Overview Of Connector Stations

T20d - 20-pin connector Locations

T100 - 100-pin connector Locations

(135) - Ground connection 2 (in instrument panel wiring harness)

(687) - Ground connection 1 on center tunnel Locations

(B159) - Diagnostic connection (in interior wiring harness)

* - Refer to applicable wiring diagram for ring break diagnosis

*2 - Diagnostic connector

*3 - Refer to applicable airbag wiring diagram

*4 - Refer to applicable wiring diagram for fuse positions

*5 - only for vehicles with Hybrid drive

*6 - Refer to applicable wiring diagram

*7 - Diameter depends on equipment

Previous Diagram 49/4 (Tracks 29-42)