Diagram 48/4 (Tracks 29-42)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Transverse acceleration sensor, Rotation rate sensor, Longitudinal acceleration sensor, ESP sensor unit, ESP sensor unit 2, All wheel drive control module, Active steering control module





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G200 - Transverse acceleration sensor

G202 - Rotation rate sensor

G251 - Longitudinal acceleration sensor

G419 - ESP sensor unit

G536 - ESP sensor unit 2

J492 - All wheel drive control module All-Wheel Drive System Overview

J792 - Active steering control module

T4ab - 4-pin connector

T6m - 6-pin connector

T10h - 10-pin connector Locations

T47b - 47-pin connector Locations

(368) - Ground connection 3 (in main wiring harness)

(370) - Ground connection 5 (in main wiring harness)

(639) - Ground connection on left A-pillar Locations

(B135) - Positive connection 1 (15a) (in interior wiring harness)

(B663) - Suspension sensor CAN bus high connection (in main wiring harness)

(B664) - Suspension sensor CAN bus low connection (in main wiring harness)

* - Only for vehicles with all wheel drive

*2 - Special equipment

*3 - Diameter depends on equipment

Previous Diagram 48/3 (Tracks 15-28)

Next Diagram 48/5 (Tracks 43-56)