Diagram 52/6 (Tracks 57-70)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Electronic damping control module, Data bus on board diagnostic interface





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J250 - Electronic damping control module Control Modules in rear part of vehicle, overview

J533 - Data bus on board diagnostic interface Overview of Control Modules in interior of vehicle

T17b - 17-pin connector, blue Overview Of Connector Stations

T20d - 20-pin connector Locations

T47a - 47-pin connector Connector Locations

(B383) - Powertrain CAN bus high connection 1 (in main wiring harness)

(B384) - Powertrain CAN bus high connection 2 (in main wiring harness)

(B385) - Powertrain CAN bus high connection 3 (in main wiring harness)

(B390) - Powertrain CAN bus low connection 1 (in main wiring harness)

(B391) - Powertrain CAN bus low connection 2 (in main wiring harness)

(B392) - Powertrain CAN bus low connection 3 (in main wiring harness)

Previous Diagram 52/5 (Tracks 43-56)

Next Diagram 52/7 (Tracks 71-84)