Oil Pump: Service and Repair
Oil Pump
Removing
- Remove the lower oil pan. Refer to => [ Lower Oil Pan ] Lower Oil Pan.
- Remove the bolts - arrows -.
- Remove the oil pump forward from the input shaft.
Installing
• Tightening specification, refer to => [ Oil Pan Upper and Lower Sections, Oil Pump and Oil Cooler Overview ] Service and Repair.
Install in reverse order, paying attention to the following:
• Replace the seal and O-ring.
- Install oil pump onto the driveshaft and fasten.
- Install the lower oil pan => [ Installing ] Lower Oil Pan.
- Fill with engine oil and check oil level.