Switch for Access/Start Authorization, Trim Panel

Switch for Access/Start Authorization, Trim Panel

Special tools, testers and auxiliary items required

• Special Ignition Lock Pliers (VAS 6339)

Removing






- Remove the center instrument panel vent. Refer to => [ Center Instrument Panel Vent ] Center Instrument Panel Vent.

- Insert the (VAS 6339) through the trim covers.

- Position the tips of the (VAS 6339) on both holes - A arrows - on the access/start authorization switch (E415) - 2 -.

- Press the (VAS 6339) together - B arrows - to spread the tips of the pliers and release the trim retaining tabs.

- Hold the (VAS 6339) pressed with one hand and remove the trim - 1 - with the other hand - arrow C -.

• Only use the (VAS 6339). Remove the trim by hand.

Installation

- Install the upper and lower trim on the switch until they audibly latch.

- Install the center instrument panel vents. Refer to => [ Center Instrument Panel Vent ] Center Instrument Panel Vent.