Top Center Defroster Vent

Top Center Defroster Vent

Removing






- Remove the center speaker trim. Refer to => [ Center Speaker Trim ] Center Speaker Trim.

- Remove the screws - 2 through 7 - and remove the upper defroster vent in the center- 1 - from the instrument panel.

- Disconnect the sunlight photo sensor (G107) connector.

Installation

Installation is reverse of removal, but note the following:

- Engage the defrost vent back into the instrument panel into the retaining tabs.

Tightening specifications, refer to => [ Instrument Panel Components Overview ] Instrument Panel Components Overview.