Tail Lamp: Description and Operation

Tail Lamps Overview






1 Tail Lamp

• In the rear lid

• Removing and installing, refer to => [ Tail Lamp ] Tail Lamp

2 Nut

3 Nut

4 Rear Turn Signal Bulb

• Left rear turn signal lamp (M6)

• Right rear turn signal lamp (M8)

• 12V, 21 W

• Bulb, replacing, refer to => [ Outer Bulb Holder ] Outer Bulb Holder

5 Brake and Tail Lamp Bulb

• Left brake/tail lamp bulb (M21)

• Right brake/tail lamp bulb (M22)

• 12V, 21 W

• Bulb, replacing => [ Outer Bulb Holder ] Outer Bulb Holder

6 Cap

• Removing and installing, refer to => [ Tail Lamp ] Tail Lamp

7 Wrench

• For removing and installing the bulb sockets

8 Central Connector

• For lamp sockets

9 Brake and Tail Lamp Bulb

• Left brake/tail lamp bulb 2 (M58)

• Right brake/tail lamp bulb 2 (M59)

• 12V, 21 W

• Bulb, replacing, refer to => [ Inner Bulb Holder ] Inner Bulb Holder

10 Wiring Bushing

11 Gasket

• Self-Adhesive

• Replace if damaged

12 Nut

Tail Lamps, Tightening Specification and Sequence:






- Tighten the nuts for the lamps in the rear lid to 3.5 Nm and in sequence - 1, 2, 3 -.